The MH-3300 is MCT’s 4th generation strip laser mark handler.  In addition to being very high speed, it handles the new larger 100mm x 300mm strips with either stacked or slotted I/O’s. The MH-3300 is ideal for either assembly or strip test operations with exceptionally fast and inexpensive changeover kits plus a wide range of post mark inspection options.

The MH-3000 is MCT’s 3rd generation strip laser mark handler.  It is a high-speed marker that handles 100mm x 275mm strips. The MH-3000 has the smallest footprint of any strip laser marker and is a low-cost compliment to any strip test operation.

Our MH Series Laser Mark Handlers support intelligent lasers from Rofin, Trumpf, Keyence, EO Technics, Alltec and other manufacturers.  

Please view this short video on the MH-3000. If you’d like to view a longer video with a demonstration, please reach out to us

REQUEST FULL DEMO

Product Information

DescriptionMH-3000MH-3300
Package Changeover< 15 minutes< 15 minutes
Jam Rate< 1 jam in 1000 strips run< 1 jam in 1000 strips run
Magazine Width28 – 110mm28 – 110mm
Magazine Length110 – 280mm110 – 310mm
Magazine Height200 – 450mm200 – 450mm
Number of Magazines1 input and 1 output2 inputs and 2 outputs
Number of Cassettes1 input and 1 output1 input and 1 output
Package TypesLead frames, LaminatesLead frames, Laminates
Strip Length50 – 275mm50 – 300mm
Strip Width23 – 100mm23 – 100mm
Strip Thickness0.10 – 0.75mm0.10 – 0.75mm
Strip Warp Allowed≤ 3mm≤ 3mm
Package Types SupportedLeaded, leadless, LGA, BGA in strip formatLeaded, leadless, LGA, BGA in strip format
Recommended Package Size3x3mm and above0.6×0.6mm and above
Note – Dependent upon laser spot size.
Type SupportedRofin, Trumpf, Keyence, Alltec, Keteca
(other integrated upon request)
Rofin, Trumpf, Keyence, Alltec, Keteca
(other integrated upon request)
Typical Mark Times Per Strip2D: 0.5 – 1.0s
Final Mark: 3.0 – 12.0s
Note – Mark times are Application and Laser Dependent
2D: 0.5 – 1.0s
Final Mark: 3.0 – 12.0s
Note – Mark times are Application and Laser Dependent
Size1.7m x 0.9m x 1.6m (L x W x H)1.7m x 1.3m x 1.6m (L x W x H)
Weight< 650kg< 750kg
MobilityTransportableTransportable
Available OptionsPre and post mark BrushingPre and post mark Brushing
ESD Ionizer, Ground Fault MonitoringESD Ionizer, Ground Fault Monitoring
Strip Orientation CheckStrip Orientation Check
Pre Mark 2DID Verification (Uplook/Downlook)Pre Mark 2DID Verification (Uplook/Downlook)
Post Mark 2DID Verification (Downlook)Post Mark 2DID Verification (Downlook)
Fixed position sample inspectionLight Box Alignment
Cell Controller Embedded or External (option)Post Mark Inspection (Mark Offset)
SmartTrak SupportCell Controller Embedded or External (option)
 SmartTrak Support
 Motorized input and output pick heads
 Motorized laser Z-height adjustment
 Motorized post mark vision inspection